If you have recently got some major renovation work done, or have had your house construction process completed, you are going to need to get a builder’s clean done. Now chances are that you are probably already familiar with the term or have at least heard it being tossed around in conversations, but if you are still uncertain about what it entails, then we will give you a brief explanation; a builder’s clean is the cleanup process that takes place after any kind of construction and building job. A builder’s clean is very different from the normal cleaning that you do around the house, so if you have had some building work done, you should look for reliable builders clean Melbourne services.
A builder’s clean involves a number of steps, but the first step is the rough cleaning process. This is done immediately after the construction work is completed, and this is the initial stages of the cleanup where just big chunks of debris, dirt, sawdust and other garbage, etc. are removed from the site.
After the initial clean sweep is done, the next stage is to start focusing on cleaning each and every single part of the building more thoroughly. So, in terms of flooring, it will be cleaned thoroughly, and in case of marble and tiled floors, they will usually be wet cleaned first, wiped down, and then vacuumed to make sure that the floors are clean. After the floors are tended to, they will then go about sweeping and cleaning the walls to make sure there isn’t any lingering dust, debris or residue on the walls, and they will then go over the rest of the vicinity, and clean over furniture if there is any, your cabinets, and other areas of the building so that it is ready to be occupied once again.